1. Support reverse polarity

2. Can connect to PBX.

5.GSM850/900/1800/1900MHz 

Main Functions:

1. Using SIM card

2. Making & answering calls after connecting to telephone set

3. Available to connect with telephone set, Billing machine, etc

4. Supports the functions of redialing and hands-free

5. Voice adjustment of calling in and out, multi-lever volume to be chosen

6. Caller ID

7. Featured with signal intensity indicator, working status indicator, breakdown indicator, etc

8. Built-in PIN code protection featured with locking device/card/network

Technique Parameters:

l Working Frequency

Rx (EGSM 900): 925~960MHz

Tx (EGSM 900): 800~915MHz

Rx (DCS 1800): 1805~1880MH

Tx (DCS 1800): 1710~1785MHz

l Power Consumption: <=5W

l Working Voltage: DC5V

l User Access Port:

Dialing tone frequency: 450Hz continued

Busy tone frequency: 450Hz 0.35s/0.35s

1. 1.       Functions & Features

Wireless &Fixed Network Access Router is an innovative wireless access terminal. You can make phone calls via GSM network .It’s ideal to be used in offices and home to reduce

Comparatively high phone charges. It also can connected to charge counter as wireless public phone .This device has the following functions:

1). One terminal taking SIM card as wireless interface suitable for GSM 900/1900 MHZ. (optional)

2).Connected to the charge counter, phone.

3).Can set up call-out/call-in restriction

4).caller ID

5).Hands free, redial, sound volume adjustment while calling in/out.

6).Provide the reverse polarity signal for charging

2. Terminal Configurations

  Standard Single –channel GSM Fixed Wireless Terminal includes the following accessories:

3. Terminal Installation

3.1 SIM card installation:

Caution! Please fix the SIM card before connecting to the power supply!

1).Upend the mainframe so you can see the SIM card pedestal at the bottom.

2).Push SIM card nog gently along with arrowhead to put it up.

3).Insert SIM card into the nog.

4).Press down the nog of SIM card and push it by the backward direction of arrowhead until the SIM nog is fixed on the card pedestal.

5).Use the SIM cardboard to cover pedestal and screw it down.

3.2 Assembly of the terminal:

1).Make sure the SIM card installed correctly.

2).Screw down the connector of the antenna to the bolt stick on the panel marked with “Antenna” on the back of the device.

3).Plug one connector of standard phone cable to the phone, and plug the other end to the port on the panel marked with “Phone” on the back of the device .

4).Make sure the switch of device if off, then plug the input connector of the adaptor to the AC “Power” port on the back of the device.

4. Operation Instructions

Turn on the power switch at the back of the terminal after connecting the terminal correctly

4.1 Explanation of indicators’ state:

                             Indicators

1)      The network indicator indicates whether the device get connected with GSM network or not

   This light is on means the device gets connected with GSM network, vice versa.

2)      The signal intensity indicators display signal intensity.

When the signal is stronger, more indictor lights will be on, vice versa.

4.2 Answer a telephone call:

When the telephone rings on, answer the phone by picking up the handset.

5. Setting Functions

This terminal can set up and adjust the following functions:

1).Set up the local area code in advance. The user can dial the local telephone without dialing the local area code.

2).Can adjust the multi-level sound volume.

3).Can set up the restriction of call-in/call out.

4).Can set up lock SIM card.